Worthington arches come as a true half round with 3”
extensions that can be cut to adjust the arch to
line up with the bottom of the window (except for
10-324 & 10-200 arches which do not have the
extensions). Worthington arches can be installed
using galvanized nails or screws and work well with
nail guns. Please test to set depth of the nail
before installing. Worthington arches larger than
48” are provided in two halves that need to be
joined in the center at the top of the window. We
recommend using urethane adhesive in the joint to
prevent separation.
To
find a matching moldings for any of our
arches, go to the molding section and find the
corresponding molding number.
Example: Matching molding for No. 10-103 Arch.
Go to molding section and find No. 01-103-16
Molding.
